Bowl Blanks Part 4 – Sealing the ends

Last night I went ahead and put 1 coat of Anchor seal on the edges of the blanks. I put the second coat on this morning. I must have done a good job on the first coat, the second coat beaded up quite a bit.

So far I am pretty happy with Anchor Seal. I still have a little left in the quart I purchased. I put 3 coats on both ends of the log and I am on the second coat of the blanks. I got it for $16.00, it is a bit more than the Latex Exterior paint I saw at WalMart. The only slight concern I have is the heat, I dont think it will be an issue but I will let you know.

Bowl Blanks Part 3 – The Borax treatment

To protect my freshly cut pecan bowl blanks and other blanks that are not bowls from bugs, I created a Borax solution loosely based on this article. I created a mixture of 1 pound 14 ounces 20 Mule Team Borax and 3 gallons of warm water.

I then dipped the blanks in the solution, pulled them out and let the excess drip back into the bucket.

I then set the blanks on some metal racks that I have to continue drying. Later tonight or tommorow I will Anchor Seal the end grain.
Copy Protected by Chetan's WP-Copyprotect.