Keeping it Clean!

Earlier this week we had our AC system cleaned and sanitized. From vents to the unit. They recommended installing a Whole House UV AIR Purifier. So we did. First we outlined and cutout the holes:

Outlined and cut-out holes marked in the AC ductwork for the UV light installation

Did a test fit:

Test fitting the whole-house UV air purifier light into the cut duct opening

Then We got a cheap, as in Dollar Tree, pair of UV protective sunglasses. Popped out a lens, traced it, and cut out a square smaller than the lens.

UV-protective sunglasses lens traced and cut down to use as a viewing window

Then tapped it in. This way you can see if the light are working. If you dont do this, you have no real way of knowing if the UV light are really on.

UV-protective lens taped into the duct panel as a viewing window to check the light

Did a dry run to test things out:

Dry run test of the installed UV air purifier light before final assembly

And:

UV air purifier light glowing through the viewing window during the test run

Success! Taped everything up.

Duct panel taped up after finishing the UV air purifier installation Finished whole-house UV air purifier installation on the ductwork, sealed and taped

We now have UV light, purified, and super duper cleaned for the whole house.