Tag: tools

Staying on track!

I wanted to add some T-Track to the end of the counter in the office. I could then do some medium and light work in the Better cooled Office area.

I started by making a couple passes with the router, going a bit deeper each pass until I got to the right depth. ½ inch.

Then I tapped it in and made sure it was flush:

Making it flush
Making it flush

Got it screwed and and tested with the Present Arms setup.

Testing
Testing

Works great! More on the Present Arms setup over on Viking-Armory.com

Chat with us on Discord

Portable Air Regulator/Dryer

I wanted to make a portable air dryer/regulator for use with my paint booth, air brush or any other system that could and would move around my shop. Here is what I came up with:

Made a tee with scrap pine 1×6, glued and screwed.

Then added Harbor Freight Dryer/Regulator and coil line. Quick and easy, gets the job done.

Copy Protected by Chetan's WP-Copyprotect.